Pay attention to details in the use of activated carbon filter

The filter element manufacturer introduces the details of the activated carbon filter element. In the water purification system, the pre-activated carbon filter element has a certain protective effect on the reverse osmosis membrane, and can prevent the residual chlorine in the raw water from damaging the reverse osmosis membrane. Therefore, it should be used during the use of the pure water machine. Regularly replace the pre-activated carbon filter element.

The filter manufacturer introduces the details when using the activated carbon filter. Activated carbon has a strong adsorption capacity, which can absorb impurities in the water, as well as impurities and gases in the air. Therefore, when storing the activated carbon filter element, it should be packed in a sealed plastic bag to prevent it from being exposed to the air and failing due to the adsorption of a large amount of impurities in the air.

The filter element manufacturer introduced that the activated carbon filter element should pay attention to the details in the use of the water purifier. The activated carbon after the water purifier has the effect of removing peculiar smell and improving the taste. If the water produced by the water purifier that has been used for a long time does not taste good or has a peculiar smell, the activated carbon filter element should be replaced immediately.

The filter element manufacturer introduces the details of the activated carbon filter element. It is worth noting that in the initial stage of using activated carbon (or the initial stage of activated carbon operation), a small amount of extremely fine powdered activated carbon may enter the reverse osmosis equipment system with the water flow, causing reverse osmosis membrane The fouling of the flow channel causes an increase in operating pressure, a decrease in water production, and an increase in system pressure drop, and this destructive effect is difficult to recover with conventional cleaning methods. Therefore, the activated carbon must be rinsed, and the fine powder can be removed before the filtered water can be sent to the subsequent RO system.

https://www.angefiltertech.com/