Melt Blown PP Precipitation Water Filter has strong dirt holding capacity and long service life

Mar 22, 2019

The Melt Blown PP Precipitation Water Filter is mainly made of non-toxic and odorless polypropylene particles, which are heated, melted, spun, drawn, and shaped to form a tubular filter element. If the raw material is mainly polypropylene. It can be called PP meltblown filter. It is not only used in large quantities in water purification. It also has excellent chemical compatibility and is suitable for filtration of strong acids, alkalis and organic solvents. Strong dirt holding capacity, long service life and low cost.

 

The filtration efficiency and filtration precision of the Melt Blown PP Precipitation Water Filter, the filter core density is uniform, and the filtration efficiency is over 99%. The filter has small resistance, large filter flow, large amount of dirt and long service life. The fiber diameter and gap are adjustable during the production process. The inner layer of the filter microporous layer is large, which increases the flow rate and the amount of dirt. Not easy to block and extend the service life.

 

The meltblown PP precipitating water filter has high self-cleanness and is non-polluting, acid-resistant, alkali-resistant and organic solvent in the operation. The strength is large, the filter element will not be deformed when the water pressure difference between the inlet and outlet of the filter exceeds 0.4Mpa, and the filtration efficiency will not decrease when the temperature exceeds 90°C.

 

https://www.angefiltertech.com/