Basic information of activated carbon filter equipment

Activated carbon filter equipment is made by adding activated carbon particles to the binder and heating and sintering. The innermost layer of the filter element is a polypropylene skeleton to enhance the compressive strength of the filter element. The framework is covered with two layers of polypropylene microfiber felt, which can intercept the liquid through the carbon core and bring out particles larger than 10 microns. The outer layer of the melt-blown filter element is covered with two layers of polypropylene ultra-fine fiber felt, which can intercept particles larger than 10-20 microns in the liquid, so that the filter element has the dual functions of filtration and purification. The outermost layer is a white plastic mesh cover, which gives the filter element a complete appearance and neat appearance. The two ends of the filter element are equipped with soft nitrile rubber end caps, so that the filter element has a good seal after being installed in the filter cartridge. The finished activated carbon filter is tightly sealed with a plastic film to prevent the filter from being polluted and keep the filter in a fresh state. Activated carbon filter has a good adsorption effect, which can effectively remove residual chlorine, odor, color and organic matter in water.

Technical principle of activated carbon filter equipment: The activated carbon filter equipment is based on high-quality shell husk charcoal and coal activated carbon as raw materials, supplemented with edible-grade adhesives, and processed by high-tech technology using special processes. It integrates adsorption, filtration, Intercepted and catalyzed, it can effectively remove organics, residual chlorine and other radioactive substances in water, and has the effects of decolorization and odor removal. It is an ideal new generation product in the liquid and air purification industry.

Type: compressed activated carbon filter, carbon fiber filter, granular activated carbon filter

Activated carbon filter device filtration method: Activated carbon filtration. According to the adsorption characteristics of activated carbon, activated carbon is mainly used to remove pollutants in the water, decolorize, filter and purify liquids and gases, and also used for air purification treatment and exhaust gas recovery (such as in the chemical industry). Recovery of gas benzene), recovery and refining of precious metals (such as absorption of gold). Activated carbon is mainly made of substances with high carbon content, such as wood, coal, nut shells, bones, petroleum residues, etc. Coconut shell is the most commonly used raw material. Under the same conditions, the active quality and other characteristics of coconut shell are the best, because it has the largest specific surface. Activated carbon is a kind of multi-pore carbide, which has a very rich pore structure and good adsorption characteristics. Its adsorption is made of physical and chemical suction, and its appearance is black. In addition to the main carbon, its composition also contains a small amount of hydrogen, nitrogen, and oxygen, and its structure looks like a hexagon. Due to the irregular hexagonal structure, it is determined that it has a large volume and high surface area. Characteristics: Each gram of activated carbon has a specific surface equivalent to 1,000 square meters.

Characteristics of activated carbon filter equipment: The activated carbon filter has a good adsorption effect, which can effectively remove residual chlorine, odor, color and organic matter in water. The activated carbon filter is a true deep-layer structure, which has the dual functions of filtration and purification. The precision of the filter is 10 micrometers. There is no need to add filter aid when using, nor need to filter after carbon treatment. Each activated carbon filter element contains 160 grams of plant sulfur-free activated carbon particles. Used for electroplating bath purification, because the filter element does not precipitate fibers or other substances, which causes pinholes or brittleness in the plating layer. Compressive strength: 0.4Mps Operating temperature: 52 ° C

Activated carbon filter device use: Activated carbon filter is suitable for the purification of process water and solutions in semiconductors, electronic devices, printed circuit boards, electroplating industry, food and beverage industry and other sectors.

https://www.angefiltertech.com/